Seller Guides
Good photographs can help us understand surplus electrical equipment before making an offer, especially when records are incomplete or equipment is part of a larger decommissioning. A useful photo set is organized, clearly labeled and limited to views that can be taken safely from outside the equipment. This guide explains what to photograph, how to sort files, what not to do, and what information can help us assess equipment without requiring you to test it or prepare an inventory.
Start with a simple folder structure
Create one main folder for the site or equipment group, then use a separate subfolder for each lineup, room or identifiable asset. Keep switchgear, a motor control center and a busway run in distinct folders rather than mixing every photo together. If equipment is already tagged with an asset number, use that label in the folder name; otherwise, assign a neutral sequence such as Lineup A or Unit 01.
Use filenames that say what is shown, not just the date or phone’s default camera number. For example, “Lineup-A-front” and “Lineup-A-rating-label” make review easier. Keep original image files where possible, and avoid compressing them until labels become unreadable. A short text note can explain that several cabinets form one lineup or that a photo shows the equipment’s approximate location.
Photograph the overall arrangement first
Begin with a wide view from a safe, accessible position showing the full exterior of the equipment and its relationship to adjacent cabinets. Take separate views of the front and, only where safely accessible, the sides or rear. A few well-framed images usually communicate more than many nearly identical close-ups. Do not enter restricted areas or move stored items, barriers or equipment to improve a shot.
For switchboards and panelboards, show the cabinet exterior and any visible nameplate or identifying label. For busway, photograph visible sections and fittings from a safe position, noting which images belong to the same run. For a unit substation or transfer switch, show the complete exterior and visible sections. Photos are for identification, not proof of internal condition or operating performance.
Capture labels without opening anything
Photograph only labels that are visible from outside and safely accessible. A sharp, straight-on image may show the manufacturer name, equipment type, serial or asset number, and ratings. Take a wider image as context and a closer image for small print. If glare obscures a label, try a different safe angle; do not remove a cover, open a door or reach around equipment to get a better view.
Keep voltage and amp ratings distinct when describing what you see: voltage is not an amp rating. Do not guess at numbers that are blurred, missing or partly hidden. You can note “label unreadable in photo” or share the legible portion, without interpreting it. Brand names can help identify the equipment, but a brand reference alone does not establish condition, compatibility or whether an item will be accepted.
Make photos understandable and safe
Avoid extreme close-ups without a wider image that identifies the cabinet or component. Include a ruler or other scale only if it can be placed without touching equipment or entering a hazardous area; it is optional. A brief note such as “left cabinet in the north row” can orient a reviewer without requiring a detailed site map. Keep people, badges and unrelated sensitive information out of frame where practical.
Electrical equipment can be energized or retain hazardous energy even when it appears inactive. Do not open equipment, remove panels, operate controls, isolate or disconnect anything to take photographs. Do not ask an unqualified person to approach or handle equipment for a picture. If a label or side cannot be photographed safely from an accessible position, leave it out and say it is not safely visible.
Send a useful set, then let us assess it
Share a manageable group of representative images rather than hundreds of duplicates. Include the exterior, visible labels and enough context to distinguish each asset; add known details such as approximate quantity or whether the equipment came from a decommissioned data center or shut-down power plant. These details can help us review the opportunity, but you do not need to create a complete inventory, test equipment or perform site work before asking about an offer.
Offers depend on the equipment and its details; not every item is accepted. For equipment we buy, we handle and pay for crane, rigging, disconnection through qualified personnel, loading, freight and hauling. There is no seller testing and no seller responsibility for that physical work. Sharing safe photos is optional support for review, not a requirement to arrange removal or transportation.

