Seller Guides
A cash offer for used switchgear depends on what the equipment is, its condition, and whether its configuration and removal requirements make sense for purchase. You do not need to test equipment or prepare it for removal to ask. Share what you already know, such as the type of gear, visible nameplate details, and whether the equipment is installed or stored. An offer is not guaranteed, and not every item will be accepted.
What shapes an offer
The first decision is identifying the equipment category: switchgear, switchboard, motor control center, panelboard, busway, automatic transfer switch, breaker, or unit substation. Similar-looking assemblies can serve different functions. If you are unsure, describe its role in the facility or use visible exterior labels; do not open enclosures to identify internal parts.
Offers depend on factors such as known condition, completeness, age information, configuration, and the scope of equipment available. A voltage rating describes electrical voltage, while an amp rating describes current capacity; they are not interchangeable. Share each label value separately if it is safely visible, and say when a marking is unreadable rather than estimating.
Share information safely
Useful details can be simple: equipment type, approximate quantity, whether it is installed or already stored, and any known history such as a shutdown or planned replacement. Exterior nameplate information and safely accessible photographs can help clarify what is being considered. Photos are optional; do not remove covers, approach exposed conductors, or enter a restricted area to take them.
A clear description of what is included helps avoid confusion. For example, note whether the offer request concerns one lineup, several separate assemblies, or a broader group of equipment, if you already know. You are not required to build an inventory or perform site work. Unknowns can be identified as unknowns; do not test the equipment to fill gaps.
Condition and uncertainty
Be direct about known issues: visible damage, missing sections, storage exposure, or a history of a fault may affect an offer. Distinguish what you have observed from what you have been told. If equipment has not been inspected or its operating history is unavailable, say so. A cash offer is based on available information and does not certify condition or guarantee acceptance.
Switchgear can be energized or retain hazardous energy even when its status is unclear. Do not operate controls, isolate equipment, remove panels, or attempt electrical checks for a sale inquiry. Any electrical disconnection or other work requiring access must be handled by qualified personnel as part of the buyer’s arrangements for equipment it agrees to buy.
Removal and seller responsibilities
For equipment we buy, we handle and pay for the crane, rigging, disconnection through qualified personnel, loading, freight, and hauling. You do not need to arrange, perform, or pay for that physical work, and you have no seller responsibility for those tasks. The buyer coordinates the logistics for the accepted equipment; do not hire a contractor or begin removal to seek an offer.
You also do not need to test, dismantle, or prepare the equipment for transport. If access rules or site conditions are already known, sharing them can help clarify planning, but arranging access work is not a prerequisite to asking for an offer. Never have unqualified staff disconnect or move electrical equipment. The equipment may remain hazardous regardless of its apparent condition.
From inquiry to decision
Start with the information readily available and identify which equipment you want considered. The buyer can review those details and make a cash offer when there is enough information to evaluate the opportunity. Ask what equipment an offer covers and what assumptions it uses before deciding. A cash offer is not a promise to purchase every item at a facility.
Acceptance depends on the equipment and the circumstances; not every item is accepted. Compare the offer’s scope with your intended disposition, including which assemblies are included, rather than assuming an entire room or site is covered. If a detail changes—such as the quantity or whether gear is installed—raise it before agreeing. For items not accepted, do not assume removal or logistics are included.

