Seller Guides
A clear switchgear nameplate photo can help identify equipment for a purchase review, but getting the image must never put you near electrical hazards. Photograph only labels visible from a safe, authorized position, without opening doors, removing covers, reaching into equipment, or operating controls. If the label cannot be seen safely, leave it alone. Share what is already visible and any details you know; a photo is helpful, not a condition of receiving an offer.
Start with safety, not the camera
Switchgear can be energized or retain hazardous energy even when it appears idle. Do not approach equipment, enter a restricted electrical area, or take a photo if doing so would violate site rules or require you to cross a barrier. Keep a safe distance and follow your facility’s access procedures; when uncertain, stop and ask the responsible site contact.
Never open an enclosure door, remove a panel or guard, reach through an opening, or operate a switch to reveal a nameplate. Those actions can expose dangerous parts or change equipment condition. Do not arrange isolation or disconnection just to take a picture. Electrical work, including any disconnection required for removal, belongs to qualified personnel.
Use only a safely visible label
Look for a nameplate that is already visible on the exterior, from a location where you are authorized to stand. Take the picture without leaning on equipment, stretching around an enclosure, climbing, or blocking an aisle. If the label is inside a closed compartment, obscured, or reachable only by moving something, do not try to access it; report that it was not safely visible.
A phone camera is usually sufficient. Hold it steady and square to the label, and use enough light to make small lettering legible without using a flash if it would create a hazard or interfere with site rules. Avoid touching the enclosure to steady the camera. If glare obscures text, a modest change in your standing angle may help, provided you remain in the same safe position.
Capture the whole plate and useful detail
First frame the entire nameplate, including its edges and any surrounding label area, so the equipment context is not lost. Then, if safe, take a closer image of the printed fields. Keep the camera focused and avoid digital zoom that turns lettering into blur. Check the images on your screen from your current safe location; do not move closer solely to improve a photograph.
Useful visible fields may include the manufacturer name, type or catalog designation, serial number, voltage rating, amp rating, and date information. These are different kinds of information: voltage describes the electrical rating, while amperes describe current capacity. Do not infer one from the other or guess at faded characters. A partial, honest image is more useful than a risky attempt to capture every detail.
Keep context without exposing sensitive areas
If practical and permitted, take a second exterior photo showing which section or lineup the nameplate belongs to. Keep people, badges, access codes, control screens, and unrelated confidential information out of the frame. Do not reposition equipment, remove stored items, or enter a controlled space to create a better background. Follow your employer’s rules for photographing industrial facilities and sharing images externally.
Before sharing, review each image for readability and unnecessary sensitive content. Do not edit or rewrite the plate text in a way that could be mistaken for the original. If you transcribe a visible detail, mark uncertain characters as unknown rather than filling them in. A simple note such as “serial number partly obscured” helps explain why a field is missing without overstating what the photo shows.
Send what you have; don’t test equipment
A safely obtained nameplate photo can support review of surplus, used, or decommissioned switchgear, including equipment from a closed plant or data center. You may also share known details about quantity, condition, or whether the equipment is still installed, but do not create an inventory or perform site work to qualify. Do not test the equipment. Missing photos or unreadable fields do not require you to open or handle anything.
Offers depend on the equipment and review; not every item is accepted. For equipment we buy, we handle and pay for crane, rigging, disconnection through qualified personnel, loading, freight and hauling. You have no responsibility to perform, arrange, or pay for that physical work, and you do not need to test the equipment. If a nameplate is inaccessible, say so and leave it closed.

