Ratings
A marked 480-volt rating is useful information when you ask us to buy surplus or decommissioned switchgear. Share what is safely visible on exterior labels, such as the stated voltage, equipment type, and any readable identification details. You do not need to test equipment or prepare it for removal. We review the information to assess an offer; offers depend on the equipment, and we do not accept every item.
Share the marked rating
If an exterior nameplate clearly shows 480 volts, report that wording as printed rather than interpreting it. A safely accessible photo can help us read the label, but do not remove a cover or enter a restricted area to get one. If the label is worn, partly obscured, or absent, say so; an incomplete detail is more useful than a guess.
Keep voltage separate from other numbers on the label. For example, a plate may show voltage alongside an amp rating, frequency, or other electrical values. If you can read them safely, share each value with its label; do not describe an amp figure as voltage or infer a rating from the equipment’s appearance.
Nominal voltage and marked rating
A facility may describe its electrical system using a nominal voltage, while the equipment nameplate states a rated voltage. Those figures serve different purposes and may not be identical. For instance, a site record might refer to a nominal 480-volt system while a plate gives a separate equipment rating. Report both as written, and identify which came from the label and which came from facility documentation.
Do not change, round, or reconcile a difference between the two figures before sharing it. A mismatch is a reason to provide the source of each value, not to assume that the equipment is suitable for a particular system. We consider the available information as part of evaluating the specific equipment; we make no compatibility determination from a voltage description alone.
Identify what is included
Describe the equipment type as accurately as you can: for example, switchgear, a switchboard, a motor control center, or a breaker associated with a larger assembly. If several pieces are present, distinguish the main assembly from separately identified equipment and note whether the visible 480-volt marking applies to one item or appears on multiple labels.
Useful context can include a readable manufacturer name, catalog or serial information, and an approximate quantity, if these details are safely visible or already documented. Brand names identify the equipment only; they do not imply an affiliation or guarantee an offer. If you are uncertain whether a label belongs to the complete assembly or a component, state that uncertainty instead of assigning it.
Keep the information safe
Use existing records or photographs taken from a safe, accessible position. Exterior labels and the visible outside of equipment are enough to begin a discussion. Do not open doors, remove panels, operate controls, approach exposed conductors, or enter an electrical work area to find a rating. Equipment can be energized or retain hazardous energy even when it appears unused or decommissioned.
You do not need to test the equipment, verify operation, or establish its condition by handling it. If a label cannot be viewed safely, leave that detail unknown. Electrical assessment, disconnection, and other work around the equipment belong to qualified personnel. A short note explaining that access is restricted is a practical, complete answer for an initial review.
Offers and physical work
We make cash offers and pay upfront for equipment we agree to buy, with the offer based on the equipment under consideration. A 480-volt marking alone does not establish acceptance or value, and not every item is accepted. Sharing clear, safely available details can inform our review, but you do not have to produce a tested inventory, perform site work, or complete another seller task to request consideration.
For equipment we buy, we handle and pay for the crane, rigging, electrical disconnection through qualified personnel, loading, freight, and hauling. You have no responsibility to arrange, perform, or pay for that physical work, and no seller testing is required. Do not disconnect or move equipment yourself; any electrical or removal work is handled by qualified personnel as part of our logistics.

