Locations
If you are preparing to sell used or surplus switchgear in Yemassee, South Carolina, a clear picture of what is on site can help us assess a potential purchase and plan a practical pickup. We buy equipment across voltage classes, including gear from closed facilities. You can share known records and safely accessible exterior photos; there is no need to test equipment or prepare it for removal. Offers depend on the equipment, and not every item is accepted.
Start with records, not equipment work
Gather information already available: equipment type, visible manufacturer and nameplate details, approximate age if known, service history, and whether records identify a voltage rating or an amp rating. These are different specifications, so keep each as labeled rather than treating one as a substitute for the other. If a detail is missing or uncertain, say so instead of estimating.
A safe exterior photo of an accessible label or the closed equipment enclosure can provide useful context. Do not open doors, remove covers, operate controls, or approach equipment you believe may be energized. You do not need to inspect internal components or produce test results. Share only information and images that you can obtain without crossing a safety boundary.
Sort mixed histories honestly
For example, a seller might be sorting records after a plant shutdown and find several switchgear sections with different histories: one documented as operating before closure, another with incomplete maintenance records, and a third known to have been stored after removal. Listing those distinctions helps us understand what is known without suggesting that the seller should verify condition through testing.
Separate confirmed facts from assumptions. Note whether a record describes past operation, a known repair, storage, or an unresolved issue, and identify which equipment it refers to when that is clear. A gap in the paperwork is useful information too. Condition and documentation can affect an offer, but a seller does not need to diagnose, certify, or restore equipment.
Describe access and staging conditions
Pickup planning can depend on where the equipment sits and what is around it. If safely known, describe whether it is indoors or outdoors, at floor level or on another level, and whether the route appears to involve a doorway, narrow aisle, stairs, or restricted access. Mention visible obstructions or access-hour limits. Do not measure, move equipment, or enter a hazardous area to answer these questions.
Existing site information can help clarify whether equipment is grouped together or spread across rooms, and whether ordinary access is shared with other operations. You may describe what is visible from a safe location; no seller-prepared staging area is required. Do not clear routes, reposition gear, or arrange lifting access on our behalf. We can discuss pickup needs after reviewing the equipment and site details.
Coordinate freight after review
For equipment we buy, we handle and pay for the crane, rigging, disconnection through qualified personnel, loading, freight, and hauling. The seller does not need to arrange, perform, or pay for any of that physical work. Do not hire a separate contractor to disconnect or remove the equipment for our pickup, and do not attempt those tasks yourself.
Freight coordination starts with a practical understanding of the accepted equipment and its location, not a promise that every item will be taken. We can discuss access constraints, pickup timing, and relevant site rules with you as the purchase is evaluated. The seller is not responsible for transportation arrangements or loading. Any site-specific coordination must keep work within qualified personnel’s role and applicable safety requirements.
Keep safety boundaries clear
Switchgear can be energized or retain hazardous energy even when a facility is shut down. Do not open equipment, remove panels, operate switches or controls, isolate circuits, or disconnect conductors to help with an assessment. Those activities belong to qualified personnel. A shutdown history alone does not establish that equipment is safe to approach or handle.
You do not test the equipment for us. No electrical testing, internal inspection, cleaning, or preparation is required from the seller. If a label or image cannot be reached safely, leave it unavailable and tell us what you know from records instead. For equipment we agree to buy, we coordinate and pay for qualified disconnection and the remaining removal and transport work.
Evaluate the offer item by item
We buy used, surplus, and decommissioned switchgear, along with other electrical distribution equipment, across voltage classes. An offer depends on the equipment presented and the information available; purchase of every section, accessory, or related item is not guaranteed. Identify items separately where possible so the review can distinguish equipment with clear records from pieces whose identity or history is uncertain.
For equipment we agree to buy, we make a cash offer and pay upfront under the purchase arrangement. Sharing known details can support a more useful review, but a complete inventory, seller-performed site work, or removal preparation is not a prerequisite. You can simply provide what is safely available, discuss access, and let us assess what we may purchase and how buyer-managed pickup would proceed.

