Counties
If you have surplus or decommissioned switchgear in McCormick County, South Carolina, a clear equipment list can make it easier to determine what may be available for purchase and what must remain with the facility. We buy used electrical equipment, including switchgear and related assemblies, and make cash offers with payment upfront and freight covered. We buy across voltage classes, but an offer depends on the equipment, its condition, completeness, and the information available; not every item is accepted. You do not need to test equipment for us. Start with records and exterior information that can be gathered safely, then have qualified personnel identify which assemblies are retired, which remain in service, and what can be released. That distinction matters especially when equipment is grouped in lineups or connected to systems that still serve a building. For equipment we agree to purchase, our team handles and pays for the crane, rigging, loading, freight, and hauling, as well as electrical disconnects performed by qualified personnel. You do not need to arrange or carry out that work.
Map the lineup before listing it
A switchgear lineup may contain several sections that look like one saleable unit but serve different purposes. Build an inventory by lineup, section, or assembly using existing one-line diagrams, panel schedules, asset records, and project closeout documents. Note visible manufacturer and identification labels, voltage rating, amp rating where shown, section count, approximate dimensions if already documented, and any known missing parts. Voltage and amperage are different ratings; record each as labeled rather than treating one as a substitute for the other.
Keep the first pass documentary and visual. Use photographs of exterior nameplates and safely accessible views, and match each image to an inventory entry with a simple identifier such as Lineup A, Section 1. Do not open doors or covers to obtain a label or photograph. If a rating or component cannot be confirmed from safe exterior access or existing records, mark it unknown rather than guessing. A clean list of known and unknown details is more useful than unsupported certainty.
Separate retired gear from retained systems
Before requesting an offer, mark each assembly as potentially available, retained, or not yet determined. Compare the proposed sale list with current drawings, project scope, and the facility’s operating requirements. An old lineup may still feed a retained load, provide a needed connection, or be reserved for a future phase. Do not infer that equipment is surplus just because replacement work has begun or a newer assembly is nearby.
For example, consider a hypothetical hospital modernization—a hypothetical example—in which some switchgear sections are retired while assemblies serving critical systems remain in use. The facility team might use current records to identify the retired sections and keep the retained systems off the sale list. Any physical boundary between those groups must be established by the people responsible for the electrical system; a seller should not decide from appearance alone. The same discipline applies to schools, plants, offices, and other facilities with phased upgrades.
Use project records to resolve boundaries
Multiple assemblies can share a lineup, room, or project number, while records may use different names for the same equipment. Reconcile asset tags, drawing references, demolition or replacement schedules, and prior service records before treating a section as available. Record discrepancies in plain language—for example, “drawing shows retained; asset list shows retired”—and ask the responsible facility or project personnel to resolve them. Do not silently choose the interpretation that makes more equipment appear available.
A useful package can include the equipment list, exterior label photographs, relevant existing drawings, and notes identifying retained or uncertain sections. Share only documents you are authorized to provide, and remove sensitive information that is not needed to identify the equipment. If drawings are outdated, state that plainly. Buyers can review the information supplied, but a preliminary review is not a substitute for the seller’s internal confirmation that the listed equipment may be released.
Describe condition without testing
You are not asked to test equipment for a sale inquiry. Instead, report what is already known: whether the assembly is described in records as used, surplus, or decommissioned; whether visible damage is present; whether exterior labels can be read; and whether known parts or sections are missing. Distinguish direct observations from historical notes. “Exterior label is legible” is an observation; “operational” is a performance claim that should not be made without an appropriate basis.
Photograph equipment only from a safe, accessible exterior position. Never open equipment, remove panels, operate controls, or attempt to isolate or disconnect it to improve a listing or check condition. Switchgear can be energized or retain hazardous energy. Qualified personnel handle isolation and disconnection, along with any work needed to establish that equipment may be removed. If safe access or equipment status is uncertain, stop and have the facility’s qualified personnel determine what is appropriate.
Make a practical offer review
A complete description helps assess whether particular assemblies fit a purchase, but it does not guarantee that every item in a lineup will be accepted. Offers depend on the equipment presented, including its identification, configuration, apparent completeness, condition information, and the records available for review. We buy equipment across voltage classes; that does not mean every rating, assembly, or combination is suitable for purchase. A voltage rating and an amp rating should be recorded separately when both are visible.
For a multi-section listing, ask that the offer identify the equipment it covers so retained or uncertain assemblies are not mistakenly included. Clarify whether sections are being considered individually or as a group, and disclose known gaps in the inventory. We make cash offers, pay upfront, and cover freight for equipment we agree to buy. Those terms do not guarantee acceptance or a particular amount, and the agreed scope should identify the equipment, and our team handles the physical work and shipment.
Coordinate release and freight responsibly
Once the facility confirms which equipment can be released, keep the sale list aligned with that decision. Give the people coordinating removal a section-by-section description and identify any assemblies that must remain. Freight is covered for equipment we agree to purchase, but timing and handling still need to be coordinated around the site’s access rules and the equipment’s location. Do not move, prepare, or disconnect electrical assemblies yourself to meet a pickup plan.
Before a transaction proceeds, resolve any mismatch between the accepted equipment description and the equipment actually designated for release. Keep a copy of the final inventory and the facility’s release decision with project records. This approach supports a more dependable review whether the seller is managing one retired section or several assemblies from a phased project: document what is known, protect systems that remain in service, and leave electrical isolation and disconnection to qualified personnel.

